Binachem Epoxy - NF (P)

Available brands - Binachem

BINACHEM EPOXY NF (P) is a two component, high solids epoxy putty. It cures to a hard and tough coat which is resistant to various solvents and chemicals. It has excellent bonding to oncrete & steel etc. BINACHEM EPOXY NF (P) is a traditional epoxy system to effectively treat cracks and quickly fill spalls or voids in concrete.

Uses

BINACHEM EPOXY NF (P) can be used for following applications.

Bonding Concrete elements
Repairing damaged concrete
Bonding steel to concrete
Repairing vertical honeycombed concrete in ridge abutments or overhead repairs on bridge soffits

Packaging:

3 Kg Set (A+B)

COVERAGE*

THICKNESS

1 -1.25 m2 / Kg

@ 1.5mm

*Coverage data are for general guidance. Actual consumption depend upon substrate, application techniques & wastages etc.

Mixing & Application:

The total contents of component (B) are added to the total contents of components (A). Both components are mixed thoroughly, preferably with a slowly rotating drill. Mix until the putty is homogenous making sure the material from the bottom and walls of the container is included.
BINACHEM EPOXY NF (P) can be applied by a trowel, knife or stiff brush up to 30mm thickness. Start the application immediately after mixing. The material should be used within 45 minutes.

Back to all products Contact us

Thank you!
Email Sent Successfully

Binachem Epoxy – NF (P)