Binachem Binafix

Available brands - Binachem

Binachem Binafix - water resistant tile adhesive (ANSI A118.1/BS5980 CLASS A, ISO 13007)

BINACHEM BINAFIX is a cement based tile adhesive with refined binders, polymers and selected aggregates to be mixed with

water for installing Ceramic tile using the thin-set method of installation. BINAFIX can be applied for bed thicknesses from

3mm to 12mm using suitable notch trowels depending upon quality of substrate & type of tiles/stone.

Uses

Excellent formula for Installing Ceramic Tile Internally on floor & wall.
Can be used for installing Quarry Tiles, Marbles, Mosaic Tiles & Natural Stones on floor.
Suitable Substrate includes Cement Masonry, Cement Mortar Bed & Brick Masonry.

Packaging:

Packaging: 20 Kg Bags

Notch trowel

Coverage *

6mm x 6mm

5.0 – 6.0 m2

12mm x 12mm

3.0 – 3.5 m2

*Coverage data are for general guidance. Actual consumption depend upon substrate, application techniques & wastages etc.

Mixing & Application:

Add 20 Kg powder to 4±0.5 liters water and mix by hand or with a slow speed mixer to homogenous, smooth trowelable consistency. Allow mixed to slake for 5-10 minutes .Adjust consistency if required. Remix and apply with proper sized notched trowel.
Apply mortar to the substrate with the flat side of the trowel, pressing firmly to work into surface. Choose a trowel that will give a coverage to the back of the tiles of at least 65-70% for walls or for internal light foot traffic.

Back to all products Contact us

Thank you!
Email Sent Successfully