Binachem BSG. CEMENT BASED GROUT ANSI A118.6, BS: 5980 & ISO 13007-3.
BINACHEM BSG GROUT – is a single component powder composed of special latex polymer, cement & fillers tile grout for filling tile joints up to 3-12 mm width. It is a specially formulated premium, fast setting, low shrinkage grout that prevents ingress of water through the joint. When mixed with water, gives a smooth, easily applied creamy paste for clean grouting of ceramic wall tiles.
Uses
- Use to fill joint width up to 3-12mm.
- May be used for both wall & floor installations.
- Ideal for Interior & exterior applications
- Residential & commercial applications
- Water & weather resistant
Packaging:
- 25 Kg Bags
Coverage:
Approximate coverage with 25 Kg Bag
DIMENSION
COVERAGE*
400x400x9mm
70.0 – 80.0 m2
& 3mm Joint width
*Coverage data are for general guidance. Actual coverage depend upon tile type, size, thickness, joint width, application tech- niques & wastages etc.
Mixing & Application:
Add 25 Kg powder to 5.5 ± 0.5 liters water and mix by hand or with a slow speed mixer to homogenous, lump free smooth consistency using a slow rotating drill (max. 250 rpm) and avoiding entrapment of any air. Allow to slake for 5-10 minutes & remix. Spread with a sharp, firm rubber grout float. Work the grout paste into the joints until completely filled. Use diagonal strokes to pack the joints. Ensure that joint is filled and grout is not just sitting on top (i.e. “bridging the joint”).Holding a rubber grout float at a 45° angle, completely fill the joints.
© ICC Cement PVT. LTD.
Thank you!
Email Sent Successfully